A question? Visit our contact page

We offer several battery tray solutions for the 3rd generation RX7 that allow you to upgrade your battery to a smaller and lighter battery whether you want to keep the battery in the engine bay or relocate it to the rear of the car.  

 

ENGINE BAY BATTERY TRAY KIT

For those who prefer to keep the battery in the engine bay, we offer a battery tray kit that is also compatible with the popular Greddy Vmount intercooler setup. Our Engine Bay Battery Tray kit is suited to fit an Odyssey PC680 battery or a battery with similar dimensions. It includes hardware and brackets that allow it to be installed with the Greddy Vmount setup.

For those who want to upgrade to a lithium battery, we also offer a Battery Tray Upgrade that allows you to use an Antigravity ATX20HD or ATX20RS battery with the Engine Bay Battery Kit. 

 

We also offer a circuit breaker kit that allows you to install a 150 amp resettable circuit breaker on top of the battery that can also be used as a quick disconnect. 

 

 

REAR TRUNK RELOCATION BATTERY TRAY KIT

For those who want to relocate the battery to the rear of the car, we offer a battery relocation kit that enables you to mount an Antigravity ATX20HD or ATX20RS battery in the rear trunk of the car.  The unique part of our rear battery tray kit is that it mounts the battery in a pocket behind the rear trim and completely hides the battery once installed.  In addition, our kit comes complete with a 200 amp resettable circuit breaker that doubles as a cut off switch.  

Rear Battery Relocation Kit Only (No Battery) 

Complete Rear Battery Relocation Kit with Antigravity ATX20HD 

Complete Rear Battery Relocation Kit with Antigravity ATX20RS

 

BATTERY FUSE BLOCK BRACKET KIT

Whether relocating the battery to the rear bins or rear trunk, it will leave the battery fuse block hanging in the engine bay, literally.  In OEM form, the battery fuse block is attached to the positive battery terminal. Once the battery is relocated, the battery fuse block is left without a proper support.  

Our Battery Fuse Block Bracket solves this very problem.  Simply put, it provides a sturdy mount, and allows the battery to be jumped or connected to a trickle charger from the engine bay. The bracket places the battery fuse block in the OEM location and utilizes a sleek rubber cap on the positive power post to keep a clean appearance. 

 

 

REPLACEMENT FUSE BLOCK BOOT

For those who prefer running an oem sized battery in the oem location, we offer a non-oem replacement fuse block boot to replace your old, torn, or missing boot.  Mazda required you to purchase a complete fuse block assembly as these were never sold separately. 

 

 

Leave a comment

Please note, comments need to be approved before they are published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

JP3 Motorsports FD RX7 Oil Catch Can Kits

JP3 Motorsports FD RX7 Oil Catch Can Kits

We have assembled various iterations of oil catch can kits that use Radium Engineering's VTA (vent to atmosphere) Competition Catch Cans both large and XL.  We have developed a custom bracket that mounts the oil catch can on the front...

Read more

Mazda FC RX7 Air Conditioning Kits

Mazda FC RX7 Air Conditioning Kits

So you've decided you want to have working AC in your FC Mazda RX7?  The only OEM items you would need to have from your FC RX7 would be the evaporator (located behind the glove box inside the dash) and dash/engine...

Read more

Ko-Ken Tools

Ko-Ken Tools

JP3 Motorsports is proud to be an official US Distributor for Ko-Ken Tools!   The full tool catalog is available HERE. Today, Ko-ken is one of the leaders in international tool production, designing and manufacturing tools in-house at the Ko-ken facility...

Read more